Call Us For Enquiry 9626442526
Visitors: 9468 Login

Machinary and Factories

Method Of Manufacturing


Wooden Doors :


This sizeable teak wood seasoning under 1000C for removing the moisture, so that doors will not bend and damage, the towel pin will be fixed inside the frame so that it will not visible outside.

Membrane Doors :


The side frame size is 4 inches of good quality imported wood. For lock and tower bolt, we are using extra pieces for screw fittings which is not available in other manufactures. The water proof MDF sheet fixed on top, and PVC sheet will be pasted. The doors will be pressed in 1000C heat and 100 Ton weight, through hot pressure machine so the bonding activity is good and durable.

White Doors :


We are manufacturing two panels, four panel and oval shape models. We are ready to give the required size of doors as per the customer demand, 4 inch frame will be good quality of wood, and for lock and tower bolt, separate wood pieces are used. Top with white MDF Sheet with designs, it is very suitable for bulk purchasers like apartments, lodges, and quarters. One thing we have to keep in our mind that this door will be getting swelling when it contact with water so it is advised that these doors can be used for inner doors. Economically this door is cheap when compared to other models.



We are importing following species of woods


PADAUK WOOD


Tree size: 100-130 Feet

COLOUR :
Heart wood color can be ranging from a pale pinkish orange to a deep brownish red. Most species tend to start reddish orange when fresh cut, darkening substantially over time to a reddish / purplish brown.

GRAINS :
Grain is usually straight, but can sometimes be interlocked, with a coarse, open texture and good natural luster.

ROT RESISTANCE :
Has excellent decay resistance, and is rated as durable to very durable, Padauk is also reported to be resistant to termites and other insects.

WORKABILITY :
Overall Padauk is easy to work, tearout may also occur during the planning on quarter sawn or interlocked grain. Padauk turns, glues, and finishes all.

PRICING / AVAILABILITY :
Widely imported as lumber in a variety of lengths and thickness, as well as turning and craft blanks, should be moderately Priced an import.


KWILA WOOD
(Common Names : Merbau, Kwila, Ipil)


Tree size: 130-200 Feet

COLOUR :
Has an orangish-brown colour when freshly cut, which ages to a darker reddish-brown, colour between boards can be highly valuable there are also small yellow mineral deposits found throughout the wood, making it easier to separate from other looks likes.

GRAINS :
Grain is straight to interlocked, texture is coarse, with a moderate natural luster.

ROT RESISTANCE :
Kwila is reported to be very durable and resists both rotting and insect attacks.

WORKABILITY :
Glues and finishes well, though it can be difficult to see due to gumming and the dulling of teeth.

PRICING :
Offered sporadically, lumber is usually sold in sample widths and lengths when available. Prices should be moderate for an imported hardwood.

C# is also a programming language
MySQL is a databased mostly used for web applications.

TEAK WOOD - BURMA TEAK


Tree size: 180-250 Feet

Teak wood from Burma or Myanmar a kind of hard wood is called the " King Of Woods " 80 to 100 % pure gurjan wood from Myanmar.

Burma teak is popular for its durability and resistance to water. It is outstanding in retention of shape and durability and is naturally durable. It is easy to handle polish and work with, so a lot of carved designs can be made.

Burma teak wood is hard there by making it resistant to termite, Burma teak wood is very strong and durable and there by requires minimal maintenance, re-polishing is recommended after a few years to doors to get back the shine to the home and furniture.

WORKABILITY :
Easy to work in all regards. Burma teak usually glues and finishes well.


TEAK WOOD - COLUMBIA TEAK


Tree size: 100-150 Feet

COLOUR :
Heart wood is typically yellowish brown, occasion will have an either reddish or olive hue. Colour tends to darken with age, narrow sapwood is pale yellow and is clearly differentiated from the hard wood.

GRAINS :
Grains is usually straight, though it can also be inter locked with a fine uniform texture and good natural luster.

ROT RESISTANCE :
Rated as very durable regarding decay resistance, and is also resistant to termites and other insects.

WORKABILITY:
In nearly all regards, Columbia teaks easy to work with both hand and machine tools, though surfacing boards with interlocking grain may cause tea rout, other downsides include a slight blunting effect on cutting edges, and the development of dark stains it left in contact with iron in damp conditions glues, stains and finishes well.

PRICING :
Trade of this species is currently tightly controlled, It's usually available as lumber in good sizes, prices are medium to high for an imported hard wood.



TEAK WOOD - PANAMA TEAK


Tree size: 150-160 Feet

COLOUR :
Yellowish-brown, colour tends to darken with age.

GRAINS :
Grains is usually straight, though it can also be interlocked with fine uniform texture and good natural luster.

ROT RESISTANCE :
Rated as very durable regarding decay resistance, and is also resistant to termites and other insects.

WORKABILITY :
In nearly all regards, panama teak is easy to work with both hand and machine tools, Though surfacing boards with interlocking grain may cause tea rout, other downsides include a slight blunting effect on cutting edges, and the development of dark stains it left in contact with iron in damp conditions glues, stains and finishes well.

PRICING :
Offered sporadically, lumber is usually sold in sample widths and lengths when available prices should be moderate for an imported hard wood.


TEAK WOOD - GHANA TEAK


Tree size: 180-120 Feet

COLOUR :
Heart wood is medium reddish-brown, commonly with black streaks, sharply defined sapwood is a pale pinkish yellow.

GRAINS :
Grains is straight to interlocked with a fine, even texture and low natural luster.

ROT RESISTANCE :
Rated as very durable, good insect resistant, though sapwood is prone to insect attack.

WORKABILITY :
Can be difficult to work because of high cutting resistance, saw slowly, and has a tendency to ride up over jointer knives, also due to its high silica content, cutting edges become severely, however the wood is stable in services, and glues, turns and finishes well.


WBL WOOD


Tree size: 100-130 Feet

COLOUR :
Pink Ivory ranges in colour from a pale brownish pink. Sapwood is pink ivory tends to pale yellow.

GRAINS :
Grains is usually straight, though it can also be interlocked with fine uniform texture and good natural luster.

ROT RESISTANCE :
Rated as very durable to very durable. Regarding decay resistance pink ivory is said to have excellent weathering character.

WORKABILITY :
WBL wood has a pronounced blunting effect on cutting edges, and it is fairly difficulty to work in board. WBL is much more common in application involving carving or turning and it turns and finishes well.


MORA WOOD


Tree size: 100-130 Feet

COLOUR :
Heart wood is light to medium reddish brown, wide pale yellow-brown sapwood is clearly de-marketed from heart wood.

GRAINS :
Has a straight to interlocked grain, with a medium to coarse texture, good natural luster.

ROT RESISTANCE :
Mora is rated as durable to very durable, and also has good resistance to insect attack.

WORKABILITY :
Species with interlocked grain, can difficult to work, frequently resulting in tea rout during machining operations, mora also has a pronounced blunting effect on cutting edges.

Copyright © SS Trading, 2016 All Rights Reserved
Designed By Technogenesis